| Analysis of the search query | what type of files are ntldr boot ini and ntdetect com |
| Competition | Low |
| The average cost per click Adsense | 0.61 € |
| The expected traffic per day | 15 |
| The expected traffic per month | 450 |
| Income per month | 450 € |
Top competitors on query "what type of files are ntldr boot ini and ntdetect com"
Why would your computer not boot up
http://wiki.answers.com/Q/Why_would_your_computer_not_boot_up Competition: low
You can select "Last Known Good Configuration" after rebooting to allow the computer to boot the last backed up files.And you can choose "Safe Mode" to remove any files you know caused the operating system to hang up. To use the disk when Windows XP won't boot,place the disk in the drive,and unto re-booting,the computer, Windows simply bypass the basic boot files on the hard drive and continue to boot up
http://files.extremeoverclocking.com/file.php?f=159 Competition: low
While the boot.ini file is technically specific to each machine depending on what partition you have Windows installed on and if you have a multiple boot setup, the majority of pcs have windows on C: in the default folder and are using an IDE hard drive. Unlike other bootdisks, the quickboot diskette doesn't care where the 3 main boot files are located, so simply unpacking them to a disk that has been formatted on an XP pc should result in a workable disk for the majority of PCs
Mosaddique - Dual-Boot Procedures - Add Win98SE to WinXP
http://homepage.ntlworld.com/mosaddique/Dual-Boot%20-%20Add%20Win98SE%20to%20WinXP.html Competition: low
You will now be prompted to enter the administrator password as follows: Type the administrator password: Enter your root password if you set up one, otherwise press the ENTER key. Assuming each drive has only one partition and you have only 1 CDROM drive then: Winxp will be drive letter C: CDROM will be drive letter D: Win98SE will be drive letter E: The reason for this is due to the Drive letter alloocation mechanism employed by Windows XP
http://www.oreillynet.com/pub/h/2337 Competition: low
You can copy the original file back into the text-based Recovery Console, which you can access by running Windows setup and choosing to recover an existing installation. This bypasses NTLDR (actually the startup never sees it) and brought me to the GRUB boot menu! I then selected the Linux kernel to boot, but I got "Error 17: Cannot Mount Selected Partition"
Create A XP Boot Disk from System Files
http://www.theeldergeek.com/create_xp_boot_disk.htm Competition: low
The point is, ensure you have a current, tested backup of all system and data files and understand how to restore the system in case something goes very wrong. You can still yell at me, but I assume no responsibility for your actions and use of the information and disclaim any legal responsibility for any consequences of such actions
http://tnind.wordpress.com/windows-xp-boot-sequence/ Competition: low
NTLDR: Is the Windows Boot- Strap Loader (Which means it is a special application that is responsible to start up other files or programs which are needed to boot up Windows.) NTDETECT.COM: transfers information about the computers Hardware to NTLDR. (Do you remember seeing the Memory getting checked at startup?) At this stage, if any of your add-on cards have a seperate BIOS (example: your Video Card), that will also be checked
How To Fix NTLDR is Missing and Related NTLDR Error Messages
http://pcsupport.about.com/od/findbyerrormessage/a/ntldrmissingxp.htm Competition: low
While this will almost certainly resolve any NTLDR errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored. Note: If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive with Windows installed is listed first
Guide for MultiBoot USB-stick with boot.ini Menu - The CD Forum
http://www.911cd.net/forums/index.php?showtopic=20089&st=24 Competition: low
What am I doing wrong?I want to be able to use my USB stick to boot AeroStudio (which is like cdshell or bcdw) and from there boot images, winpe, etc.I need it partitioned as NTFS so I can use the whole 4 GB of space. Some are designed to circumvent PC security to resolve and fix problems.When an av flags a file you want to keep try running the file through another av, several online scanners are available
How to create a boot disk.
http://www.computerhope.com/boot.htm Competition: low
Alternatively, to create a Windows 98 boot diskette manually from Windows, click Start, Shutdown, and choose the option to restart the computer in a MS-DOS prompt. Click Start Create Windows XP Setup diskettes Microsoft is beginning to phase out bootable floppy diskettes in favor of bootable CD discs and has not included a method of creating a bootable floppy diskette in Windows XP or from the CD
http://www.techwarelabs.com/community/showthread.php?t=11400 Competition: low
I have a nForce 4 chipset which requires seperate RAID drivers for Windows, I followed the instructions to create a bootable RAID XP system and everything went well, the system was up and running, I even installed all of my software and transferred all of my files. Last thing i did last night was to delete a lot of my files off of the disk with the old XP installation, including all the files in the root directory
http://www.quickonlinetips.com/archives/2005/12/ntldr-is-missing-press-any-key-to-restart/ Competition: low
I had just recently installed a second hard drive and the computer was trying to boot from it, which of course had no operating system and thus the cause for the message. NOTE: This article is for informational purpose only and is just a detail of how I went about fixing my computer for common NTLDR error which can affect your computer too
http://superuser.com/questions/373957/i-got-an-ntldr-is-missing-on-win-xp-and-fixed-it-but-why-did-this-happen-and Competition: low
Question 1: Any idea how this error occurred in the first place? The Needed Fix So the fun part about this laptop is that all its external drives are kinda busted, so I had to grab an IDE-to-USB cable, pull out the laptop hard drive and hook it up to my desktop. Why couldn't I see these files on the laptop's hard disk when it was mounted via USB on my desktop (I find it hard to believe they just disappeared)? The Actual Fix In the end, I grabbed a Windows XP install disk and just copied over NTLDR and NTDETECT.COM as well as a generic boot.ini to the root of the laptop drive
Computer Boot Sequence - The Mossywell Web Site
http://www.mossywell.com/boot-sequence/ Competition: low
That is, the maximum disk size would be a pathetic 32 MB! If, however, sectors are clumped together into groups of 4, for example (4 sectors per cluster), then the operating system would be able to access 128 MB, and so on. Yes, I know I'm still behind the times, but that happens as you get older! Finally made the page look half decent in Netscape 7, Opera 7 and Mozilla 1.4; also fixed the floating navigation on the left in this plethora of browsers
Windows 7 and XP dual boot - invalid boot.ini !? - Windows Forums
http://windowsforum.com/threads/windows-7-and-xp-dual-boot-invalid-boot-ini.2940/ Competition: low
When EasyBCD was being developed, one of the problems was being able to put the XP boot files on an unlettered partition, such as the Windows 7 small 100 MB one. One more thing that might be helpful to someone: Win7 can install itself on any partition in any drive and then boot just fine, but it can only repair its own startup if it is on the first drive in any system
http://en.kioskea.net/forum/affich-251-boot-ini-problem-with-xp Competition: low
Add comment Add comment Answer +1 Report Rosco Aug 25, 2008 02:38PM Hi folks, There is step by step instructions to solving the boot.ini issue here as well as a whole host of other boot problems
Guide for MultiBoot USB-stick with boot.ini Menu - The CD Forum
http://www.911cd.net/forums/index.php?showtopic=20089&pid=134630 Competition: low
Besides NTFS Format is handy for Install of Vista from USB via GRUB4DOS chainload of bootmgr FAT32 is extremely slow in Windows XP FileCopy during TXT Mode (has anyone an idea why ?), whereas NTFS Format of USB-Drive makes everything go faster than with FAT Format. Booting the USB-stick via boot.ini directly into MS-DOS This requires making a Bootsector File for each specific Boot Option and Adding a rule to boot.ini mkbt.exe of Bart Lagerweij is very handy to make such Bootsector Files
What does NTLDR stand for, and how do i fix it if its missing? - Yahoo! Answers India
http://in.answers.yahoo.com/question/index?qid=20070807005715AAcP6nt Competition: low
Solutions: Computer is booting from a non-bootable source Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive
NTLDR is missing
http://www.computerhope.com/issues/ch000465.htm Competition: low
If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard drive cable with another cable or a new cable. Corrupt NTLDR or NTDETECT.COM file Windows 2000 usersWindows XP users Windows 2000 users If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error
http://operating-systems.wonderhowto.com/how-to/repair-corrupt-ntldr-and-ntdetect-com-system-files-microsoft-windows-xp-359339/ Competition: low
Brad Floyd commented on How to Make Your Knife as Sharp as the Devil Himself For your info i have china made 2 for 10 dollar knives that will get sharp enough to shave they get just as sharp as my ka bar and other lot more costly knives for a fact they are easier to sharpen... Using the Windows Recovery Console The Windows 2000 and Windows XP CDs supplied by Microsoft have a tool called the Recovery Console which can be used to repair errors that prevent Windows XP from starting using the command line
http://support.microsoft.com/kb/318728 Competition: low
Setup installs a new copy of Windows 2000.Log on to the new copy of Windows 2000.Click Start, and then click Run.In the Open box, type cmd, and then click OK.At the command prompt, type drive:, where drive is the boot drive of the computer, and then press ENTER. For information about how to configure and how to verify the correct BIOS settings for the computer, see the computer documentation or contact the manufacturer of the computer
http://thestarman.narod.ru/asm/mbr/bootini.htm Competition: low
Note: For some odd reason, bootpart labels whole physical drives as C:, D:, etc.; otherwise, it gives very good information about the drive (including the location of each Extended MBR sector!). So, if you decide to delete the new OS, simply set your old OS as the default boot OS and uncheck the item for displaying the menu list (or manually set it to zero; same result)
http://tinyempire.com/notes/ntldrismissing.htm Competition: low
Go Back What if none of the options worked? By using the boot disk, we've bypassed any problems with the MBR and NTLDR file that the hard drive in your computer was trying to use. New Hard Drive Option Purchase a new hard drive, remove the old one, install the new one as master, install your OS, install the old one as slave (remember to change jumpers), copy all the data off the old hard drive, burn CD's or DVD's of the most important stuff, perform a low-level format of the old drive, make a partition on it and use it as backup storage drive or just another place to store your stuff
Simple "ntldr is missing" fix with boot floppy or CD, then fix HD
http://www.tinyempire.com/shortnotes/files/ntldr_missing.htm Competition: low
If possible, try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to recheck the cables). If you don't have a credit card or pay pal account, you can mail a check to me, use the form below to send me your email address and I'll send you the address to mail the check to you
NTLDR - Wikipedia, the free encyclopedia
http://en.wikipedia.org/wiki/NTLDR Competition: low
If a non NT-based OS is selected, NTLDR loads the associated file listed in boot.ini (bootsect.dos if no file is specified or if the user is booting into a DOS based OS) and gives it control. In the case of a floppy the BIOS interprets its boot sector (first sector) as code, for NTLDR this could be a NTLDR boot sector looking for the ntldr file on the floppy
NTLDR - Boot.ini - NTDETECT Missing (no Windows cd)
http://en.kioskea.net/faq/3002-ntldr-boot-ini-ntdetect-missing-no-windows-cd Competition: low
NTLDR - Boot.ini - NTDETECT Missing (no Windows cd) Downloading and preparing the necessary files Downloading and preparing the Recovery Console If you have the Windows installation CD see this tip
Why would your computer not boot up
You can select "Last Known Good Configuration" after rebooting to allow the computer to boot the last backed up files.And you can choose "Safe Mode" to remove any files you know caused the operating system to hang up. To use the disk when Windows XP won't boot,place the disk in the drive,and unto re-booting,the computer, Windows simply bypass the basic boot files on the hard drive and continue to boot up
While the boot.ini file is technically specific to each machine depending on what partition you have Windows installed on and if you have a multiple boot setup, the majority of pcs have windows on C: in the default folder and are using an IDE hard drive. Unlike other bootdisks, the quickboot diskette doesn't care where the 3 main boot files are located, so simply unpacking them to a disk that has been formatted on an XP pc should result in a workable disk for the majority of PCs
Mosaddique - Dual-Boot Procedures - Add Win98SE to WinXP
You will now be prompted to enter the administrator password as follows: Type the administrator password: Enter your root password if you set up one, otherwise press the ENTER key. Assuming each drive has only one partition and you have only 1 CDROM drive then: Winxp will be drive letter C: CDROM will be drive letter D: Win98SE will be drive letter E: The reason for this is due to the Drive letter alloocation mechanism employed by Windows XP
You can copy the original file back into the text-based Recovery Console, which you can access by running Windows setup and choosing to recover an existing installation. This bypasses NTLDR (actually the startup never sees it) and brought me to the GRUB boot menu! I then selected the Linux kernel to boot, but I got "Error 17: Cannot Mount Selected Partition"
Create A XP Boot Disk from System Files
The point is, ensure you have a current, tested backup of all system and data files and understand how to restore the system in case something goes very wrong. You can still yell at me, but I assume no responsibility for your actions and use of the information and disclaim any legal responsibility for any consequences of such actions
http://tnind.wordpress.com/windows-xp-boot-sequence/ Competition: lowNTLDR: Is the Windows Boot- Strap Loader (Which means it is a special application that is responsible to start up other files or programs which are needed to boot up Windows.) NTDETECT.COM: transfers information about the computers Hardware to NTLDR. (Do you remember seeing the Memory getting checked at startup?) At this stage, if any of your add-on cards have a seperate BIOS (example: your Video Card), that will also be checked
How To Fix NTLDR is Missing and Related NTLDR Error Messages
While this will almost certainly resolve any NTLDR errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored. Note: If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive with Windows installed is listed first
Guide for MultiBoot USB-stick with boot.ini Menu - The CD Forum
What am I doing wrong?I want to be able to use my USB stick to boot AeroStudio (which is like cdshell or bcdw) and from there boot images, winpe, etc.I need it partitioned as NTFS so I can use the whole 4 GB of space. Some are designed to circumvent PC security to resolve and fix problems.When an av flags a file you want to keep try running the file through another av, several online scanners are available
How to create a boot disk.
Alternatively, to create a Windows 98 boot diskette manually from Windows, click Start, Shutdown, and choose the option to restart the computer in a MS-DOS prompt. Click Start Create Windows XP Setup diskettes Microsoft is beginning to phase out bootable floppy diskettes in favor of bootable CD discs and has not included a method of creating a bootable floppy diskette in Windows XP or from the CD
I have a nForce 4 chipset which requires seperate RAID drivers for Windows, I followed the instructions to create a bootable RAID XP system and everything went well, the system was up and running, I even installed all of my software and transferred all of my files. Last thing i did last night was to delete a lot of my files off of the disk with the old XP installation, including all the files in the root directory
I had just recently installed a second hard drive and the computer was trying to boot from it, which of course had no operating system and thus the cause for the message. NOTE: This article is for informational purpose only and is just a detail of how I went about fixing my computer for common NTLDR error which can affect your computer too
Question 1: Any idea how this error occurred in the first place? The Needed Fix So the fun part about this laptop is that all its external drives are kinda busted, so I had to grab an IDE-to-USB cable, pull out the laptop hard drive and hook it up to my desktop. Why couldn't I see these files on the laptop's hard disk when it was mounted via USB on my desktop (I find it hard to believe they just disappeared)? The Actual Fix In the end, I grabbed a Windows XP install disk and just copied over NTLDR and NTDETECT.COM as well as a generic boot.ini to the root of the laptop drive
Computer Boot Sequence - The Mossywell Web Site
That is, the maximum disk size would be a pathetic 32 MB! If, however, sectors are clumped together into groups of 4, for example (4 sectors per cluster), then the operating system would be able to access 128 MB, and so on. Yes, I know I'm still behind the times, but that happens as you get older! Finally made the page look half decent in Netscape 7, Opera 7 and Mozilla 1.4; also fixed the floating navigation on the left in this plethora of browsers
Windows 7 and XP dual boot - invalid boot.ini !? - Windows Forums
When EasyBCD was being developed, one of the problems was being able to put the XP boot files on an unlettered partition, such as the Windows 7 small 100 MB one. One more thing that might be helpful to someone: Win7 can install itself on any partition in any drive and then boot just fine, but it can only repair its own startup if it is on the first drive in any system
Add comment Add comment Answer +1 Report Rosco Aug 25, 2008 02:38PM Hi folks, There is step by step instructions to solving the boot.ini issue here as well as a whole host of other boot problems
Guide for MultiBoot USB-stick with boot.ini Menu - The CD Forum
Besides NTFS Format is handy for Install of Vista from USB via GRUB4DOS chainload of bootmgr FAT32 is extremely slow in Windows XP FileCopy during TXT Mode (has anyone an idea why ?), whereas NTFS Format of USB-Drive makes everything go faster than with FAT Format. Booting the USB-stick via boot.ini directly into MS-DOS This requires making a Bootsector File for each specific Boot Option and Adding a rule to boot.ini mkbt.exe of Bart Lagerweij is very handy to make such Bootsector Files
What does NTLDR stand for, and how do i fix it if its missing? - Yahoo! Answers India
Solutions: Computer is booting from a non-bootable source Many times this error is caused when the computer is attempting to boot from a non-bootable floppy disk or CD-ROM. Once these files have been copied to a floppy diskette reboot the computer and copy the NTLDR and NTDETECT.COM files to the root directory of the primary hard disk drive
NTLDR is missing
If the issue continues it is also a possibility that the computer has a faulty cable, try replacing the hard drive cable with another cable or a new cable. Corrupt NTLDR or NTDETECT.COM file Windows 2000 usersWindows XP users Windows 2000 users If your computer is using Microsoft Windows 2000 and you are encountering the NTLDR error
Brad Floyd commented on How to Make Your Knife as Sharp as the Devil Himself For your info i have china made 2 for 10 dollar knives that will get sharp enough to shave they get just as sharp as my ka bar and other lot more costly knives for a fact they are easier to sharpen... Using the Windows Recovery Console The Windows 2000 and Windows XP CDs supplied by Microsoft have a tool called the Recovery Console which can be used to repair errors that prevent Windows XP from starting using the command line
Setup installs a new copy of Windows 2000.Log on to the new copy of Windows 2000.Click Start, and then click Run.In the Open box, type cmd, and then click OK.At the command prompt, type drive:, where drive is the boot drive of the computer, and then press ENTER. For information about how to configure and how to verify the correct BIOS settings for the computer, see the computer documentation or contact the manufacturer of the computer
Note: For some odd reason, bootpart labels whole physical drives as C:, D:, etc.; otherwise, it gives very good information about the drive (including the location of each Extended MBR sector!). So, if you decide to delete the new OS, simply set your old OS as the default boot OS and uncheck the item for displaying the menu list (or manually set it to zero; same result)
Go Back What if none of the options worked? By using the boot disk, we've bypassed any problems with the MBR and NTLDR file that the hard drive in your computer was trying to use. New Hard Drive Option Purchase a new hard drive, remove the old one, install the new one as master, install your OS, install the old one as slave (remember to change jumpers), copy all the data off the old hard drive, burn CD's or DVD's of the most important stuff, perform a low-level format of the old drive, make a partition on it and use it as backup storage drive or just another place to store your stuff
Simple "ntldr is missing" fix with boot floppy or CD, then fix HD
If possible, try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to recheck the cables). If you don't have a credit card or pay pal account, you can mail a check to me, use the form below to send me your email address and I'll send you the address to mail the check to you
NTLDR - Wikipedia, the free encyclopedia
If a non NT-based OS is selected, NTLDR loads the associated file listed in boot.ini (bootsect.dos if no file is specified or if the user is booting into a DOS based OS) and gives it control. In the case of a floppy the BIOS interprets its boot sector (first sector) as code, for NTLDR this could be a NTLDR boot sector looking for the ntldr file on the floppy
NTLDR - Boot.ini - NTDETECT Missing (no Windows cd)
NTLDR - Boot.ini - NTDETECT Missing (no Windows cd) Downloading and preparing the necessary files Downloading and preparing the Recovery Console If you have the Windows installation CD see this tip
No comments:
Post a Comment